Bench hooks are portable work surfaces used to make basic woodworking tasks, such as crosscutting boards and drilling holes, easier to perform. As a bonus, they help protect the surface of your woodworking bench from bumps and dings.
In the makerspace, bench hooks can be used for numerous tasks and roles (such as a surface to solder on without ruining Mom’s dining room table).
These week, my youngest and I made two bench hooks. The most common design works best with saws that cut on a push stroke. We also made and tested a bench hook modified for pull saws. Bench hooks can be modified in numerous ways, so take the jump and get hooked!
Continue reading “Home #Makerspace: The Bench Hook is a Secret Weapon for #Woodworkers”
Here’s a great “getting started” 3D printing project for young #MakerEd students. It combines rudimentary circuit knowledge, gross motor skills and safe tool use. It costs about $5 to make (excluding the cost of a 3D printer) and can be modified to fit any holiday, not just Halloween.
These pumpkin string lights are appropriate for young makers K and up. While this version uses glue guns, safety conscious adults can use blue tack or sticky wax instead.
Continue reading “Home #Makerspace: Halloween Pumpkin String Lights #3DPrinting #makered Project”
This week, we made a quick foldable checkerboard inspired by my youngest child’s love of the game. This basic folding design can expanded and modified to play any board game. Just let your imagination run wild!
This project incorporates measuring, marking boards square, using a hand drill and hand saw, and an all natural, no-fuss stain (although it is stinky!). Super quick, super cheap and super easy for young makers between K – 3rd grade. Continue reading Home #Makerspace: Simple Kid’s Game Boards for Young Makers #Woodworking
This week, I built a 8 box set of stackable makerspace boxes. This design can be accomplished using three power tools (router, miter saw and jigsaw) and the design can be adjusted to fit your space and needs.
The dimensions given work for boxes made with 3/4″ plywood. If you use thicker or thinner plywood for the sides, your dimensions will change. Double check your measurements before cutting.
The KID Museum of Bethesda, MD offers a range of Maker activities through outreach, studio time, open play/build and structured classes. It’s open for drop-in visits on weekends and reserved for workshops, school trips and scheduled events during weekdays. … Continue reading #Makerspace Tour: KID Museum in Bethesda, MD
In this project, young makers use a vinyl cutter to cut and score geometric nets, connecting 2D shapes to 3D prisms, polyhedrons, etc. They learn to recognize the difference between two and three-dimensions, while also seeing a relationship between the two. Lastly, this is a great opportunity for fine motor skill practice. The plastic requires superglue to connect, but paper nets can be assembled with hot glue or glue sticks.
Continue reading “Home #Makerspace: Making Geometric Nets with Vinyl Cutter”
It’s not all kid-projects and makerspaces tours in this space. I have a little time for personal projects. After sorting my shop in my recent relocation, I cannibalized the irons from some really terrible (and I mean terrible) hand planes. … Continue reading This Week in the Shop: Wood Hand Planes & Spray Finish
Sometimes, young (and old…) woodworkers can use a little help sawing a board accurately, especially if the board must have a specific angle or length. A miter box helps a woodworker saw a 90 or 45 degree angle into a piece of wood. They are cheap to make, easy to modify and cut accurately.
Miter boxes are channels with slots cut into them. The slots guide the hand saw blade for accuracy and precision. The sides allow the user to clamp down the miter box and work pieces to the table or work bench, which greatly increases safety.
To use a miter saw, place your work piece in the channel, with your cut line against the kerf of the wood. Use a clamp to clamp the work piece and miter box to the table, as shown. Then place the saw in the cutting slot and saw away!
Take the jump to build your own.
Continue reading “Home #Makerspace: Miter Boxes for #Woodworking #Makered”
Completed, ready for sanding.
Close up of the camfer detail.
Lid assembly ready to go.
Measure the long side, then secure with glue and nails.
Clamping the Assembly
Parts of the bread box project laid out.
This quick project makes a great starter box for grown woodworkers, but it especially shines as an approachable young person skill builder. This slick box teaches three major skills: measurement, accuracy in manufacture of parts and joinery. A teacher or parent can use this simple project to differentiate between beginning, intermediate and expert woodworkers by adding complexity in the appropriate areas.
The following instructions describe how to build this project with pre-k to 2nd or 3rd graders. The adult preps the wood, while the student assembles the pieces, learning to use a hammer, nail set, hand drill and hand plane. Older students can measure and cut their own wood using appropriate tools.
Continue reading “Home #Makerspace: The Bread Box Project #woodworking #makerEd”
Northern Virginia hosts a handful of makerspaces, with all different working models. I’m spending the next several months visiting as many makerspaces as possible. You can catch my Manhattan tour here!
Northern VA hosts a number of makerspaces. I’m going to focus on the two non-profit makerspaces, Nova Labs & Makersmiths.
Continue reading “Community Watch: Nova Labs & Makersmiths #makerspace Tour”