Top Five Maker Projects for the Beginning Maker Ed Teacher
Do you want to get into Making and Maker Ed? Don’t know where to start? Don’t have a makerspace? No problem! Here’s five ideas, classroom tested, which can be built using a minimum of tools for students in the K – 8 grade scale.
Towers of Power
A great starting point for a beginning Maker teacher. Students build towers made of just paper and scotch tape. Students can build the tallest tower with unlimited amounts materials, constrain themselves to limited materials, or introduce new materials, such as straws and paper clips. You can crush the towers with textbooks – which will hold up the most weight? In groups, the tower of power can facilitate role-sharing, leadership and planning skills in children. The best part? Variations on this theme are endless – and the materials can be found in any school office.
Materials: Paper, tape.
Tools: Scissors. Maybe.
The humble catapult has to be one of my favorite projects to introduce students to engineering principles, motion and fun. The catapult allows students to chase down the best launching angle, the ratio between power and arm length, discussion projectile motion, gravity, physics laws and a whole host of other things. Plus, every kid likes trying to smash something apart with teacher permission. Little hands might pinch themselves handling the strong lever, so it’s good practice to disengage the spring for students while they make their catapults.
Materials: mouse traps, wood stirring sticks, erasers, wood blocks, ping-pong balls, hot glue.
Tools: hot glue guns.
A great way to get into making is to give yourself and your students a few hours to explore the Making design process. Design challenges are a great way to get this done. Have a hard time limit, test the devices, go back and reflect the next day. Here are three of my favorite prompts:
Bridge to Nowhere:
Design a bridge to span a foot-long gap and hold as much weight as possible. An extension could be to build a cantilever – a bridge with only one footing. Use a set amount of craft sticks or materials in order to encourage creativity in solutions.
Materials: wood craft sticks, hot glue, Five gallon bucket with weights.
Tools: hot glue guns, diagonal cutters to cut craft sticks.
Float the Boat:
Design a boat which holds the most cargo, moves through the water the quickest, or has the most efficient weight to cargo ratio. Find the best shape for sails, design the fastest hull, and find the balance point.
Materials: tinfoil, craft sticks, bamboo skewers, paper, hot glue, clay, wood scraps, pens and markers
Tools: None! Or you can use scissors, hot glue guns and craft sticks.
Chucking eggs off something high always gets kids motivated. A great way to discuss momentum and illustrate why you should always wear your seat belt.
Materials: cardboard boxes, packing tape, junk and stuff (the weirder, the better). Think packing materials, fabric scraps, string, rope, plastic bags, etc.
Tools: Usually only scissors.
If a teacher offers a student the opportunity to make something joyfully noisy, they usually take it. Make sure you take your headache meds, because you will want them! Homemade instruments come in all different sizes and types – from wood drum, to coffee can shakers, to wind chimes to xylophones, it just takes a little Google search to find great ideas.
Materials: Wood scraps, strings, dried rice, beans, sandpaper, cardboard – both tubes and boxes, hot glue, tape, small sections of pipe.
Tools: Hot glue, ear plugs during demonstration time.
Some to Grow On:
Once a teacher gets her “sea legs” for facilitating Maker projects, why not expand your skills? By now you’ve seen what you can do and what your kids can do. You’ve probably worked out your system for managing the classroom, documenting the learning and managing supplies. Kick it up a level and unlock some achievements using electricity.
Electromagnets illustrate the connection between electricity and magnetism. In real life electromagnets are the cornerstone of many common electrical devices, such as door bells, burglar alarms, car doors and electric motors. Students can fiddle with them to create small toys which pick up ferrous objects.
Materials: Metal bolts, copper wire, batteries
Tools: Pliers, Scissors
Squishy circuits solve one of the biggest conundrums with younger Makers: how to build with real electronic components when the young hands have yet to develop the fine motor skill to connect relatively small parts together via grown up tools? Try using play dough! The recipe looks to be a piece of flour (I’m pretty sure it’s the old recipe my mother used when I was a kid…) and a small collection of electronic parts are cheap online.
Materials: Flour, water, salt, electronic components such as motors, LED, etc.
Tools: hot plate and pots, if you are making with the students, or simply small bags to hold the materials in.
MakeyMakey Controller Boards
Once the students have made a few electronic circuits, they might ask for something a bit more…exotic. Give them a programmable microcontroller board which can incorporates the physical world into the programmable computer. Ever play a banana piano, or design a custom video game controller? Ever create a dancefloor which can play different songs with each tile? Or dance on a piano? MakeyMakey can make it happen.
Materials: Anything you can get your hands on. Tinfoil, wires.
Tools: Pliers, scissors.
Thank you for visiting my practice zone and project showcase. If you wish to lend your support for this site, please like WoodshopCowboy on Facebook or follow me on Twitter. If you are interested in making and education, why not check out Work Notes, a curated set of articles from the web, published every week?
Make it safe & keep the rubberside down.